AirCooledNut.com

Home > Zoom-zoom > Ducati > Ducati voltage regulator/rectifier relocation
I used a 3/32" drill bit to make a pilot hole in the captured brass nut.  The bottom of the nut is funnel-shaped so the bit will automatically drop to the center.

I used a 3/32" drill bit to make a pilot hole in the captured brass nut. The bottom of the nut is funnel-shaped so the bit will automatically drop to the center.

VR_move_002.jpg VR_move_003.jpg VR_move_004.jpg VR_move_006.jpg VR_move_007.jpg VR_move_008.jpg VR_move_009.jpg