|
|
I made a pigtail bridge, effectively just lengthening the distance between the original electrical plugs. This allows me to put the resistor into the circuit, in parallel. This tricks the ECU into thinking it's running incandescent bulbs & thus keeps it from rapidly flashing (bulb-out warning). I was successful on the right side with using blue splice/snap-lock connectors. The left side it wasn't working so I ended up soldering the resistor leads directly to the bridging wires. Perfect. In hind-sight I should've done this to the right side...oh well, some other day. Coated with liquid electrical tape & then wrapped in real tape.
|
|
