Added: Everything you need to know to mount a MOSFET R/R!

Here's the bracket I made from some scrap steel I had. It's 3/16" (5mm) thick. If you use a different thickness just make sure the piece used is thick enough to hold 4 threads at a MINIMUM! You want plenty of fastener thread engagement for the M6x1.00mm tap as that is where one side of the MOSFET R/R will be mounted. The chamfered hole is made with a 17/64" bit and then widened via chamfering. NOTE: Prior to this I had my MOSFET R/R mounted in the stock location with just one bolt and had NO ISSUES with it coming loose/moving.