Last additions - Ohlins rear suspension install |
Done!349 viewsDec 27, 2012
|
|
331 viewsI used the top of the hole in the bolt where the Allen wrench entered.Dec 27, 2012
|
|
308 viewsThere's a indentation in the seat pan that my tape measure consistently fit nicely in.Dec 27, 2012
|
|
335 viewsLower bolt. Use a 10mm Allen wrench to remove the bolts. Though they already have molyb (grease B using Ducati nomenclature) smeared on them I (later) added a little bit more.Dec 27, 2012
|
|
345 viewsI used my engine hoist to lift my bike by the frame. I'm so glad I have this! This was necessary to get the full extension sag measurement as well as lifting the bike to take pressure off the lower bolt so it could be removed.Dec 27, 2012
|
|
Detail 3310 viewsThe Ohlins shock (left) has an adjustable lower mount as seen by the blue locking nut and threads.Dec 27, 2012
|
|
Detail 1333 viewsOEM Sachs on top (black spring) and Ohlins racing on the bottom (yellow spring).Dec 27, 2012
|
|
Detail 2308 viewsThe Ohlins shock has more threads for more adjust-ability, likely for the range of springs it can accommodate.Dec 27, 2012
|
|
|