Last additions - icbm |
240 viewsMay 14, 2018
|
|
231 viewsMay 14, 2018
|
|
236 viewsMay 14, 2018
|
|
234 viewsMay 14, 2018
|
|
242 viewsMay 14, 2018
|
|
242 viewsMay 14, 2018
|
|
243 viewsMay 14, 2018
|
|
242 viewsMay 14, 2018
|
|
241 viewsMay 14, 2018
|
|
245 viewsMay 14, 2018
|
|
244 viewsMay 14, 2018
|
|
501 viewsWill even work for my son's bicycle :-)Jun 17, 2017
|
|
1088 viewsHere is my Sport Classic in the new Derek Weaver vise.
I kept the original wheel stop because it is in a stronger mounting location. Using the supplied DW wheel stop would require mounting it on the vertical strip just under the lift bed. That is welded on and could possibly bend if struck too hard when rolling the bike against it. It would also require drilling two more holes...meh, why bother?
https://www.derekweaver.com/bikers-garage/motorcycle-lift-parts-accessories/w-vise-motorcycle-vise-tire-clamp/
Jun 17, 2017
|
|
Mounting measurements512 viewsAll measurements are from the inside boundaries. Final measurements may slightly differ (~1/8") after bolts are tightened. This won't affect operation.
Drilling requires a 1/2" drill bit for metal. All of the holes in the vise parts are on the large side so there is a little bit of room for small tweaks in mounting positioning.
Jun 17, 2017
|
|
499 viewsSport bike clamped in without straps.Jun 17, 2017
|
|
480 viewsJun 17, 2017
|
|
506 viewsJun 17, 2017
|
|
517 viewsMy Diavel Strada (cruiser-ish) clamped in without straps.Jun 17, 2017
|
|
548 viewsDue to some minor slop in vise, gently press an object in the vise (I used a 2x4) and then tighten the bolts in a star pattern.
While the clamp could be mounted the other direction it would likely interfere with a bike that has deep fenders. Also, the clamp would need to be opened more to allow the axle, calipers, and axle sliders past.Jun 17, 2017
|
|
524 viewsI placed a thin ruler under the clamp that moves and then bolted the screwing mechanism to it. This gave the bottom of the clamp a tiny bit clearance to better move over the surface of the lift. Yeah, I'm being anal and it's probably not necessary.Jun 17, 2017
|
|
3333 files on 167 page(s) |
|
4 | |
|