 Most viewed - Late model oil breather |
340 viewsUsing an internal pipe wrench to easily and safely tighten the internal bolt that holds the breather to the mount.
|
|
338 viewsWhat it looks like when complete. The black paint was removed during the cleaning process.
|
|
337 viewsHome-made gasket made from 1/32" rubberized gasket material from the FLAPS.
|
|
327 viewsUnderside of breather showing PCV (positive crankcase ventilation) valve, part number 022 115 542. Again, home-made gasket between breather and white retaining nut.
|
|
326 viewsClose-up of the internal pipe wrench, cam gear in the neutral position.
|
|
317 viewsDrop the metal sleeve in...
|
|
299 viewsClose-up of the internal pipe wrench, cam gear in the engaged position.
|
|
296 viewsTop of breather showing PCV inside.
|
|
284 views...then the spring rest washer...
|
|
283 views...and finally place the spring and cap on the breather.
|
|
|
|
|
|
