AirCooledNut.com

Home > Zoom-zoom > How-to > Jetta Halogen90003 to HID Bi-Xenon
1
The far left box shows plastic removed for the HID wires and the 3-prong plug that normally goes on the halogen bulb.  Make the left [driver] side slightly bigger to accommodate all wires.  Should be snug!  Center box shows how bulb retaining hook is moved to under the frame and the far right box shows how the retaining wire is positioned to hold the HID bulb in.  It will require a slight bending of the wire but not too much because you don't want to break the spring steel!!

1

The far left box shows plastic removed for the HID wires and the 3-prong plug that normally goes on the halogen bulb. Make the left [driver] side slightly bigger to accommodate all wires. Should be snug! Center box shows how bulb retaining hook is moved to under the frame and the far right box shows how the retaining wire is positioned to hold the HID bulb in. It will require a slight bending of the wire but not too much because you don't want to break the spring steel!!

Bi-Xenon9003_001-a.jpg Bi-Xenon9003_003.jpg Bi-Xenon9003_004.jpg Bi-Xenon9003_006.jpg Bi-Xenon9003_007.jpg Bi-Xenon9003_009.jpg Bi-Xenon9003_010.jpg