Home Login

 AirCooledNut.com
Album list Last uploads Last comments Most viewed Top rated My Favorites Search
Home > Zoom-zoom > How-to > Goldwing turn signal lube
Return to the thumbnail page FILE 3/9 Return to start See previous file See next file Skip to end
When putting the female part of the switch onto the male part, make sure the sliding contact doesn't catch on the electrical pads on the female piece. Use a scribe or small, flat screwdriver blade to hold it down as you slide the female part on.

When putting the female part of the switch onto the male part, make sure the sliding contact doesn't catch on the electrical pads on the female piece. Use a scribe or small, flat screwdriver blade to hold it down as you slide the female part on.

GW_beam_switch_001.jpg GW_beam_switch_002.jpg GW_beam_switch_003.jpg GW_beam_switch_004.jpg GW_turnsignal_switch_001.jpg GW_turnsignal_switch_002.jpg GW_turnsignal_switch_003.jpg
 

Powered by Coppermine Photo Gallery