Last additions - Ducati voltage regulator/rectifier relocation |
2141 viewsI used a 3/32" drill bit to make a pilot hole in the captured brass nut. The bottom of the nut is funnel-shaped so the bit will automatically drop to the center.May 04, 2010
|
|
2024 viewsGently and at medium speed, drill a hole through the center. All the way through. You don't need a big drill either, the brass and plastic will drill easily. Go on...do it!May 04, 2010
|
|
2102 views...so just move it to the side or under the seat pan for the time being.May 04, 2010
|
|
2450 viewsHere's what you'll see when you remove the seat. Everything is in the stock location and nicely packaged. The stock location does allow air flow but it's not the greatest.
For clarification, I refer to the regulator/rectifier as "R/R" to keep things short-n-sweet.May 04, 2010
|
|
2079 viewsThe cable for the seat release is held in by two very simple compression clips. The cable will pull straight out...May 04, 2010
|
|
2166 viewsUsing a 8mm socket, remove the bolts from the R/R and the two that hold the seat pan to the frame in the rear.May 04, 2010
|
|
|
|
|