Home Login

 AirCooledNut.com
Album list Last uploads Last comments Most viewed Top rated My Favorites Search
Home > Zoom-zoom > Ducati > PCIII-USB installed
Return to the thumbnail page FILE 1149/3332 Return to start See previous file See next file Skip to end
I used the pick to pull back the OEM wire bale that holds the female connector to the injector. The small screwdriver is then used to keep the bale from snapping back while pulling the bale further out with the pick.

I used the pick to pull back the OEM wire bale that holds the female connector to the injector. The small screwdriver is then used to keep the bale from snapping back while pulling the bale further out with the pick.

ic1_003.jpg HID_065.jpg Bus_middle_seat_003.jpg 005.JPG closet_left.jpg exhaust_01.jpg insulation_004.jpg
 

Powered by Coppermine Photo Gallery