AirCooledNut.com

Home > Zoom-zoom > Ducati > Diavel low-beam HID
Done!  I used a piece of wire sleeve tubing (that black ribbed bit) to protect the power wires from rubbing against the zip-tie and hourglass brace.  Most likely it's not necessary but while I was in there...just in case....

Done! I used a piece of wire sleeve tubing (that black ribbed bit) to protect the power wires from rubbing against the zip-tie and hourglass brace. Most likely it's not necessary but while I was in there...just in case....

IMAG1595.jpg IMAG1607.jpg Bellas_birth_012.jpg grips_slapper_018.jpg IMG_1048.JPG grips_slapper_011.jpg breather_01.jpg