Home Login

 AirCooledNut.com
Album list Last uploads Last comments Most viewed Top rated My Favorites Search
Home > Zoom-zoom > Ducati > Diavel low-beam HID
Return to the thumbnail page FILE 213/428 Return to start See previous file See next file Skip to end
Done! I used a piece of wire sleeve tubing (that black ribbed bit) to protect the power wires from rubbing against the zip-tie and hourglass brace. Most likely it's not necessary but while I was in there...just in case....

Done! I used a piece of wire sleeve tubing (that black ribbed bit) to protect the power wires from rubbing against the zip-tie and hourglass brace. Most likely it's not necessary but while I was in there...just in case....

039.JPG 4_Before.jpg grips_slapper_017.jpg IMAG1607.jpg 003~0.JPG IMAG1244.jpg 019~0.JPG
 

Powered by Coppermine Photo Gallery