 Last additions - Wolfgang's Gauge Lowering Mounts |
712 viewsSep 11, 2010
|
|
662 viewsThe gauges ever so slightly touch the headlight bucket.Sep 11, 2010
|
|
808 viewsThe lowered gauge faces are just about in-line with the stock handle bars.Sep 11, 2010
|
|
689 viewsSep 11, 2010
|
|
656 viewsRider's perspective.Sep 11, 2010
|
|
775 viewsSep 11, 2010
|
|
1103 viewsSep 11, 2010
|
|
898 viewsSep 11, 2010
|
|
1110 viewsSep 11, 2010
|
|
1004 viewsSep 11, 2010
|
|
1023 viewsSep 11, 2010
|
|
After...1103 viewsNow the gauge faces upward a little bit more thus allowing the rider (me) to view them better. A more direct, heads-on view.Sep 11, 2010
|
|
1112 viewsGauges mounted to the lowering brackets.Sep 11, 2010
|
|
The necessary bits1072 viewsThe two black oval pieces are the lowering mounts. A 4mm Allen head wrench is for the shown M6 x 1.00 x 12mm stainless steel screws and, of course, thread locker.Sep 11, 2010
|
|
1129 viewsLowering brackets mounted to the bike.Sep 11, 2010
|
|
1093 viewsRemove the stock bolts using a 5mm Allen wrench. Keep the stock bolts because you use them to remount the gauges to the lowering brackets.Sep 11, 2010
|
|
897 viewsSep 11, 2010
|
|
1121 viewsThe smaller screw in place and with thread locker applied.Sep 11, 2010
|
|
Stock mountings1002 viewsSep 11, 2010
|
|
744 viewsSep 11, 2010
|
|
|
|
