 Last additions |
341 viewsJul 29, 2012
|
|
331 viewsJul 29, 2012
|
|
347 viewsJul 29, 2012
|
|
322 viewsJul 29, 2012
|
|
343 viewsJul 29, 2012
|
|
349 viewsJul 29, 2012
|
|
348 viewsJul 29, 2012
|
|
343 viewsJul 29, 2012
|
|
347 viewsJul 29, 2012
|
|
364 viewsJul 29, 2012
|
|
343 viewsJul 29, 2012
|
|
373 viewsJul 29, 2012
|
|
342 viewsJul 29, 2012
|
|
351 viewsJul 29, 2012
|
|
431 viewsLeft side of the engine showing the two connectors for the rear (vertical) cylinder injector. The YELLOW wires from the PCIII go here.Apr 28, 2012
|
|
454 viewsA quick video tour of the installed harness. For easier viewing please go to http://www.youtube.com/watch?v=h8ePhGSbxsoApr 28, 2012
|
|
463 viewsThe PCIII protected inside some bubble-wrap and under the seat.Apr 28, 2012
|
|
421 viewsRight side of the engine showing the two connectors for the front (horizontal) cylinder injector. The ORANGE wires from the PCIII go here.Apr 28, 2012
|
|
409 viewsI used the pick to pull back the OEM wire bale that holds the female connector to the injector. The small screwdriver is then used to keep the bale from snapping back while pulling the bale further out with the pick.Apr 28, 2012
|
|
415 viewsOnce the bale is pulled out then the connector can be removed. As you can see, removing the bale doesn't need to be pretty to be effective.Apr 28, 2012
|
|
| 3332 files on 167 page(s) |
 |
21 | |
|
