 Last additions - Zoom-zoom |
360 viewsUse a #1 Phillips screwdriver to remove the clear lens retaining screw.Mar 22, 2014
|
|
361 viewsSize comparison of the incandescent (left) bulb vs. the LED unit (right). Though the LED unit is taller it will still fit inside the signal housing with room to spare.Mar 22, 2014
|
|
With film applied.362 viewsLow beam (regular OEM bulb) and running light.Mar 15, 2014
|
|
With film applied.358 viewsRunning light on.Mar 15, 2014
|
|
With film applied.370 viewsHeadlight and running light off.Mar 15, 2014
|
|
336 viewsAdd a new zip-tie to secure the headlight cables snugly, NOT TIGHTLY. Now the headlight can be mounted to the two lower anti-vibration mounts and the acorn nuts snugged. Done!Mar 15, 2014
|
|
409 views3-pin connecter goes on next. Notice the positioning.Mar 15, 2014
|
|
410 viewsPut the electrical connectors back together. They only go on one way so it's pretty much idiot-resistant. The 2-pin goes on first. Notice the positioning.Mar 15, 2014
|
|
425 viewsThe improved squeegee in action, applying the bottom tint first.Mar 15, 2014
|
|
421 viewsMounting points.Mar 15, 2014
|
|
Side view, both lights covered394 viewsTop and bottom lights covered in lightest tint, LED not covered.Mar 15, 2014
|
|
404 viewsTo reduce scratches from the squeegee, wrap it in a semi-thick cloth. This is mine from a previous film application and is what I used after I noticed small scratches appearing on the film when I first started using the supplied one.Mar 15, 2014
|
|
Side view, half and half413 viewsLower half with lightest tint applied, LED and top have no film on them.Mar 15, 2014
|
|
Front view, both lights covered412 viewsTop and bottom tinted, LED running light not tinted.Mar 15, 2014
|
|
Front view, half and half412 viewsMy little helper showing the bottom tinted and the top untinted.Mar 15, 2014
|
|
423 viewsBoth top and bottom covered, LED uncovered. I know the bottom looks blueish but the film is the same color on top and bottom.Mar 15, 2014
|
|
423 viewsBottom covered, LED and top uncovered.Mar 15, 2014
|
|
415 viewsShows how the top and bottom parts of the headlight fairing join.Mar 15, 2014
|
|
410 viewsAll apart and ready to go! The headlight fairing is two pieces.Mar 15, 2014
|
|
418 viewsRemove these four bolts (4mm Allen) to free the headlight from the headlight fairing.Mar 15, 2014
|
|
| 1529 files on 77 page(s) |
 |
8 | |
|
