 Most viewed - Ducati voltage regulator/rectifier relocation |
1746 viewsSpace is now available. I'll be using this to house my Dynojet PowerCommander III.
|
|
1661 viewsThe MOSFET R/R, painted bracket, and stainless-steel fasteners. Blue Loc-tite is necessary on all three fasteners. The counter-sink bolt uses a 4mm Allen while the two cap bolts use a 5mm Allen wrench.
|
|
Mounted and wired!1620 viewsThis is how it looks when done.
|
|
1527 viewsPosition the bracket with the right bolt, having the hole centered on it. Tighten the counter-sunk bolt (left side) into the bracket and seat pan's captured nut. Remove the bolt from the right side.
|
|
1518 viewsNext, loosely put in the left bolt. This will help keep the left R/R hole lined up.
|
|
1472 viewsNow insert the right bolt in the R/R and tighten into the seat pan's captured nut. Remove the left bolt, apply Loc-tite (just like the other two fasteners) and tighten it to the bracket. Very snug but not so tight that you strip out the threads in the metal!
|
|
|
|
|
|
