Home Login

 AirCooledNut.com
Album list Last uploads Last comments Most viewed Top rated My Favorites Search
Home > Zoom-zoom > How-to > Routan LED eyebrows
Return to the thumbnail page FILE 277/334 Return to start See previous file See next file Skip to end
Grommet installed. It's low enough that it will not interfere with the closing of the relay box lid. The fuse tap wire is 16 gauge so I used a grommet that had a 5/32" bore and 1/4" x 3/32" groove.

Grommet installed. It's low enough that it will not interfere with the closing of the relay box lid. The fuse tap wire is 16 gauge so I used a grommet that had a 5/32" bore and 1/4" x 3/32" groove.

GW_beam_switch_003.jpg 404a.JPG IMAG0895.jpg HID_041.jpg 511.JPG 513.JPG HID_038.jpg
 

Powered by Coppermine Photo Gallery