 Last additions - Routan LED eyebrows |
384 viewsThis shows just how much the head lamps are angled on top. The left side has the LED array far back (towards the engine) whereas on the right side I wasn't as accurate and the LED array is about 3mm-5mm more forward (away from the engine). This clearly shows how the lip on the head lamp disburses the light. The left side is what I was originally looking for so I should've been more patient when installing the right side. Experience gained.Apr 16, 2012
|
|
356 viewsLow beams on.Apr 16, 2012
|
|
352 viewsOEM DRL on.Apr 16, 2012
|
|
314 viewsParking lights on.Apr 16, 2012
|
|
309 viewsLow beams on.Apr 16, 2012
|
|
326 viewsParking lights on.Apr 16, 2012
|
|
325 viewsApr 16, 2012
|
|
314 viewsWith low beams on. Very visible from the sides.Apr 16, 2012
|
|
341 viewsJust after sunset. At the time I took these pictures it was brighter out than what appears in the images. The LEDs are bright enough to the camera that it used a faster shutter speed, thus making the image look darker than it really is.Apr 16, 2012
|
|
326 viewsFacing into the sun, the LEDs can still be seen although they aren't as bright as dedicated OEM units found on other vehicles.Apr 16, 2012
|
|
327 viewsIn the shade.Apr 16, 2012
|
|
All done!333 viewsLights on. I took this picture with the flash to dim the LED array as they are very bright.Apr 13, 2012
|
|
318 viewsRouting the power feed wire along an existing loom.Apr 13, 2012
|
|
317 viewsThe red wire in the background is the turn signal tap while the white wire in the foreground is the feed to the DRL array.Apr 13, 2012
|
|
320 viewsJust a close-up of the power feed from the relay box tapped into the main power feed line that goes between the DRL LED array. The connector that's connecting white wire to red wire is what's feeding the DRL LED array.Apr 13, 2012
|
|
314 viewsShowing the finished wiring.Apr 13, 2012
|
|
342 viewsJust testing the left DRL LED array directly to the relay box. Used the camera flash to 'dim' the LEDs so they wouldn't wash out the picture. They are so bright that it can be seen that they are on.Apr 13, 2012
|
|
325 viewsFeed the power feed wire through the grommet and crimp on the connector. It should be snug in order to keep moisture and dust out.Apr 13, 2012
|
|
323 viewsThe fuse tab plugged in and with the stock 20A fuse in the BOTTOM. The top fuse will be a 1A to 3A item -- what ever is the smallest I can find -- since the LED array doesn't pull an appreciable amount of current.Apr 13, 2012
|
|
324 viewsStock 20A fuse removed and put in its new home.Apr 13, 2012
|
|
|
|
