 Last additions - 914 tranny swap |
295 viewsRemoving the speedo sender from the damaged tail cover.Aug 06, 2006
|
|
326 viewsMy rebuilt tranny still had oil in it. But tipping it on it's bell-housing would let the oil leak out the breather port. So I pushed a plug into the hole on the breather and securly zip-tied it. Worked perfectly to hold the oil in while I swapped tail covers.Aug 06, 2006
|
|
303 viewsThis is what I saw when on the tanny end when I removed the tail cover. That dumbbell looking gear stack directly in front is what goes on the shaft that is inside the tail cover.Aug 06, 2006
|
|
307 viewsWhen I carefully removed the broken cover this is what the inside looked like.Aug 06, 2006
|
|
|
|
